From Cnwiki

Revision as of 14:27, 10 May 2016 by Srgr (Talk | contribs)
Jump to: navigation, search

Beorn is a virtualisation server, providing virtual machines for research and student projects. The server was purchased in December 2015 and has been named after Beorn, the character of The Hobbit.

This page contains static information, i.e. guides and hardware documentation. For more dynamic content, i.e. currently deployed virtual machines and their network address allocations, please see Ressource assignment and deployed VMs on Beorn.


Hardware Characteristics

The server has the following characteristics:

• DELL PowerEdge R430

• Processor: Intel Xeon E5-2630 v3, 8 cores 16 threads @ 2.40GHz

• RAM: 2x16GB, 2133MHz

• Storage: 2x400GB SSD, hardware RAID1

• Network Adapter: 2x1GBit Ethernet

The server is placed in the server room inside the laboratory (Edison 331) mounted on the middle rack, and has three years of basic warranty provided by DELL, running from ~December 2015.

Server installation guide

This installation guide follows the guide on Radagast. If you encounter problems, try looking at that page first.

1: Install Ubuntu

Install Ubuntu 14.04 LTS from USB drive (use standard lab admin account as user).
Create your own superuser (

2: Install SSH

Install SSH:

  $sudo apt-get install openssh-server

Save public key on server: Sec. 6 in
Remember to turn off password authentication: Sec. 9 in

3: Install virtualization components

Install components:

  $sudo apt-get install qemu-kvm libvirt-bin ubuntu-vm-builder bridge-utils

Add user to libvirtd group:

  ~$ sudo adduser <username> libvirtd

4: Setup bridge (cannot be done via SSH)

Shutdown network connection, take a backup of the interfaces file and enter the interfaces file:

  ~$ sudo ifdown em1
  ~$ sudo cp /etc/network/interfaces /etc/network/interfaces.factory-defaults
  ~$ sudo chmod a-w /etc/network/interfaces
  ~$ sudo editor /etc/network/interfaces

Change the file to:

  # This file describes the network interfaces available on your system
  # and how to activate them. For more information, see interfaces(5).
  # The loopback network interface
  auto lo
  iface lo inet loopback
  # # The primary network interface
  # auto em1
  # iface em1 inet dhcp
  # Bridged network interface
  auto br0
  iface br0 inet dhcp
       bridge_ports em1
       bridge_stp off

Bring up the new bridge:

  ~$ sudo ifup br0

5: Create the build-command script

Create and enter the script file:

  $sudo nano /var/lib/libvirt/images/

Change the file to:

  vmbuilder kvm ubuntu \
         --hostname <insert> \
         --user <insert> \
         --pass <insert> \
         --libvirt qemu:///system \
         --addpkg openssh-server \
         --addpkg linux-image-generic \
         --destdir=./image \
         --flavour virtual \
         --bridge br0 \
         --mac 02:00:02:06:00:<insert last two digits> \
         --suite trusty \
         --cpus 1 \
         --mem 1024 \
         --swapsize=1024 \
         --rootsize 10000

Guide for creating virtual machines

In this guide, the user "jhj" creates a virtual machine (VM) named "VirtualMachine1" with the IP address "". The MAC address used in the guide is from the MAC-IP address pair for "", found in Ressource assignment and deployed VMs on Beorn.

1: Create folder

Go to the VM images folder, create a new directory for the machine (MachineName.InitialsOfCreator), copy the build-script template to the directory and enter the directory:

  $cd /var/lib/libvirt/images/
  $sudo mkdir VirtualMachine1.jhj
  $sudo cp VirtualMachine1.jhj/
  $cd VirtualMachine1.jhj

2: Edit and run the build-script

Enter the build-script:

  $sudo nano

Modify the build-script:

  vmbuilder kvm ubuntu \
         --hostname VirtualMachine1 \
         --user test \
         --pass test \
         --libvirt qemu:///system \
         --addpkg openssh-server \
         --addpkg linux-image-generic \
         --destdir=./image \
         --flavour virtual \
         --bridge br0 \
         --mac 02:00:02:06:00:07 \
         --suite trusty \
         --cpus 1 \
         --mem 1024 \
         --swapsize=1024 \
         --rootsize 10000

3: Create and start the VM

Run the script (takes a couple of minutes) to create the VM:

  $sudo sh

Start the VM:

  $virsh start VirtualMachine1

4: Access the VM

Access the VM through SSH using the IP address "". Remember that the IP address was assigned to the VM because you used the from the MAC address from the MAC-IP pair in Ressource assignment and deployed VMs on Beorn.

See following guide for using SSH key-authentication instead of password authentication:

Personal tools